Rubber Safety Matting As Per ASTM D178

---

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. Poly Electro safe Mat are highly recommended for total safety of workmen from electrical shock when working in or around environment like-

• High Voltage Panels, 
• Sub-station, 
• Power Transformer Rooms,
• LT & HT Labs,
• Near Bus bars,
• Near Control Panels etc. 

• Confirms ASTM D 178 specifications. 
• No Adverse Effect of Acids, Alkalis and Transformer Oil. 
• Manufactured Without Any Metallic Derivatives  
• Suitable For Both A.C & D.C  Electrical Installations 
• Easy To Install. 
• Water And Moisture Proof, Does Not Decay. 
• High Tensile Strength and Elongation Properties. 

Class      Thickness    Max. Use Voltage      AC Proof Voltage    Di-electric Strength  

0                  3.2mm                     1.0 KV                            5 KV                             6 KV  

1                  4.8mm                     7.5 KV                         10 KV                          20 KV  

2                  6.4mm                  17.0 KV                         20 KV                          30 KV  

3                  9.5mm                  26.5 KV                         30 KV                          40 KV  

4                 12.7mm                  36.0 KV                         40 KV                          50 KV  

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)  .

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.  

1. Standard Length                      Mats in rolls of 10/20/30mtrs. and more available on request.  
2. Standard Width                      1.0 Mtr. – Width up to 1500mm also available on request.  
3. Standard Thickness              3.2mm – 12.7mm (ASTM D 178) 
4. Form                                              Rolls,  Mats.  
5. Working Temperature     -10°C to 70°C  Colors   
6. Design                                      Fabric Impression / Corrugated / Fine Ribbed  

• Base material is "Elastomer", free from any insertion. 
• Country of Origin - India 
• Tolerance on Thickness +/- 10% 
• Tensile Strength (N/mm2) Min. 4.83 MPa (700 psi) 
• Elongation at Break (Min.) 250% 
• Heat Ageing Tensile & Elongation not less than 75% of org. value. 
• Water Absorption Not more than 3%. 
• Acid/Alkali Resistance Very Good 
• Oil Resistance 4% max. - volume increase. Extreme Low Temperature Resistant upto -40°C. 
• Expected Life 5years.